Caffewerks Silicone Group Gasket 8.5mm

yellow-top

This product is out of stock

Earn 0 reward points

We’re sorry we’re out of stock, but we can let you know as soon as this product becomes available again - this will usually be at the weekend

Enter your details below and we’ll email you once this item is back in stock.

Your NameYour Email Address

Caffewerks Silicone Group Gasket (Yellow) ø 73x57x8.5mm

Suitable for Gaggia Classic and E61 machines.

These soft silicone rubber group seals are ideal for upgrading the black rubber seals within the standard machine.  They provide a much longer useful life (though it's still a good idea to change them approximately annually) and remain soft and pliable throughout their lifetime - resulting in a positive and progressive locking in of the portafilter.

As these group gaskets do not become firm over months and years of use, they are significantly easier to remove for cleaning, maintenance or replacement than standard black rubber ones.


NOTE that this group gasket is not suitable for the Gaggia Classic RI9403 model.

DISCLAIMER:  The installation of any of our parts or kits, and any modification of any espresso machines undertaken by reference to our installation and/or user guides, should only be conducted by persons with proper electrical safety knowledge who are capable and qualified to undertake such work and modifications.  Many of the components within espresso machines operate at high temperature, high pressure and with mains electrical voltages at high current in the presence of water – any of these could cause serious personal injury, shock, burns, fire, explosion, other property damage and possibly death.  We shall hence not be liable for any damage to property, personal injury or other loss caused by the improper or incorrect use of the aforementioned installation and/or user guides or the provided kit(s) or any of those kit’s component or constituent parts.  By commencing installation of our kit(s) you agree to accept all liability associated with the modification of your espresso machine, and agree to hold us in no way responsible or liable for any loss, damage or injury howsoever, wherever or whenever caused.  You further agree to indemnify us and our agents, officers, directors and employees, immediately and on demand, against all claims, liability, damages, costs and expenses, including legal fees, arising out of any installation, use, misuse or failure of any of our kits or component parts thereof.

Be the first to review this product.

Leave a review

from Karthik Balasubramanian

Your question:

Would this fit the new Pro version ? if not would you have the 8 mm one soon in stock ?
Our answer:

Yes, this 8.5mm works well with the Classic Pro - and provides a lock-in position (at 6 or 7 o'clock) similar to the standard rubber gasket.  If you'd prefer the portafilter to lock in a little further (5 or 6 o'clock) then the 8mm will work well - and we'll have them in stock soon.

Vote if you found the above question and answer Helpful ( 11 ) or Unhelpful ( 0 )




Got any questions - Send them to us here...