Extended (for scales) MAX slim drip tray complete with large grate and long vent tube for Gaggia Classic

Extended MAX Drip tray with grate and tube

Extended (for scales) MAX slim drip tray complete with large grate and long vent tube for Gaggia Classic

$0.00
$52.23
excluding VAT

View Product Information

Stock situation:
  Brushed : Currently out of stock!
  Mirror : Currently out of stock!

Quantity

Earn 0 reward points

We’re sorry we’re out of stock, but we can let you know as soon as this product becomes available again - this will usually be at the weekend

Enter your details below and we’ll email you once this item is back in stock.

Your NameYour Email Address

*** The Extended MAX Drip Tray is in volume production - and we WILL definitely have stock when we reopen from our Summer Break - Apologies for the delay on this one ***

We've custom designed these Extended MAX slim or shallow drip trays, and are having them vacuum moulded in thick and durable black ABS plastic.

This drip tray differs from the normal slim drip tray that we sell in so far as there is a 40mm extension on the front of it which we use to expand the water capacity of the tray - and the front panel is also deeper (so that it sits on the counter-top).  This design was created and the product produced in response to customers asking for a deeper drip tray with such an extension, so that they could more easily place weighing scales on the drip tray.  We've now enhanced this design to include the larger water capacity and necessary larger metal grate.

As opposed to our Extended drip tray and Slim drip tray, the Extended MAX drip tray has a larger water capacity and uses a much a larger 304 stainless steel grate.  The included grate is optionally available in either brushed or mirror finish stainless steel.

As they are shallower than the original, at 25mm high - which is around 30mm lower than the original drip-tray, we are also supplying a custom stainless steel vent tube (6mm OD, 0.5mm walls, just like the original - but better quality and with a quality stainless finish rather than chrome) that is longer (158mm) so that it reaches just above the drip tray perfectly.   This longer vent tube is also available on its own from us here.

This single tray design has been made to fit all models of Classic as well as possible. The image gallery shows the drip tray in use within a Classic Pro.

These trays are made for us by a UK plastics moulding company to our design and specification.

Unlike 3D printed drip trays, these drip trays are very durable - being manufactured from ABS with a textured finish on the top surfaces and a smooth finish on the underside.  Having tested these drip trays along with the standard Gaggia tray, and various 3D printed drip trays (including ones made from PLA, PLA+ and PETG) the difference in temperature resistance is significant - with these and the original Gaggia drip tray easily being able to take multiple trips through a domestic dishwasher = whereas the 3D printed parts suffered in a number of ways (including warping, flexing and delamination of the layers).

The approximate water capacity of a standard Classic drip tray is 550ml; our Extended slim drip trays hold 225ml (41% of original capacity, and the same as our Slim drip trays), whereas this Extended MAX drip tray holds 385ml - 71% more than the regular Extended/slim drip tray, and 70% of the capacity of the original Classic drip tray.

NOTE that due to the laser cutting process used to manufacture the stainless steel grates, it is possible for rust marks to develop on the underside of the grate during early use.  This is caused by the vapourised steel around the holes covering the underside of the tray, and if surface rusting occurs it can be easily polished/scoured off and it won't reappear as it is simply a light surface covering.  The grates themselves are 1mm thick 304 stainless steel.


This product contains:

  • Deeper slim drip tray, 25mm high (by 194mm wide and 160mm deep) and vacuum moulded in black ABS
  • Supplied with larger stainless steel grate (optionally mirror or brushed finished)
  • Custom 6mm OD x 0.5mm walls (5mm ID) stainless steel vent tube, 158mm long

DISCLAIMER:  The installation of any of our parts or kits, and any modification of any espresso machines undertaken by reference to our installation and/or user guides, should only be conducted by persons with proper electrical safety knowledge who are capable and qualified to undertake such work and modifications.  Many of the components within espresso machines operate at high temperature, high pressure and with mains electrical voltages at high current in the presence of water – any of these could cause serious personal injury, shock, burns, fire, explosion, other property damage and possibly death.  We shall hence not be liable for any damage to property, personal injury or other loss caused by the improper or incorrect use of the aforementioned installation and/or user guides or the provided kit(s) or any of those kit’s component or constituent parts.  By commencing installation of our kit(s) you agree to accept all liability associated with the modification of your espresso machine, and agree to hold us in no way responsible or liable for any loss, damage or injury howsoever, wherever or whenever caused.  You further agree to indemnify us and our agents, officers, directors and employees, immediately and on demand, against all claims, liability, damages, costs and expenses, including legal fees, arising out of any installation, use, misuse or failure of any of our kits or component parts thereof.


Be the first to review this product.

Leave a review

No questions yet - Please use "Ask a Question" if you want to know more or contact us on Chat...

Got any questions - Send them to us here...