This classic looking plastic handled regular spouted portafilter is suitable for any Gaggia Classic model. It will also fit some other Gaggia models that use a similar portafilter group mount with 6.6mm ears/wings.
- Width: approx 78mm wide (ear to ear)
- Length: approx 240mm
- Handle diameter : approx 30mm
- Handle material: black plastic, with chrome endcap
- Portafilter material: polished chrome plated brass
- Supplied with: double spouts (3/8" thread) and basket retaining spring
- Portafilter spring: 1.4mm
Note that this is a regular spouted portafilter - we also have a naked / bottomless version of this portafilter with the same handle.
Some other models that this portafilter will also fit include: New Baby, Baby, Baby Class, Baby Twin, Baby Dosata,
Gaggia Coffee, Classic, Classic Pro, Classic 2019, Classic 2020, Evolution, Dose, Pure, Color, Paros, Tebe, Espresso, Topazio
Spout position - When the spouts are attached to the portafilter you may be lucky, and they may tighten in exactly the position that you want the spouts to be in. However, most of the time this is not the case, and with every spouted portafilter you can wind PTFE tape around the thread of the portafilter to adjust the position/point at which the spouts tighten and eventually point. Typically you may need 10-15 turns of tape on the thread in order to do this - though more or less tape will allow you to adjust the final tightening position further. Depending on the locking in position of your portafilter you may need the spouts in different positions, or as your group gasket wears or is replaced this may change - but adding or removing tape will allow you to adjust the position of the spouts.
Be the first to review this product.