pt100 RTD temperature sensor - M4 mounting screw for Gaggia and some Rancilio Silvia machines

pt100 sensor

pt100 RTD temperature sensor - M4 mounting screw for Gaggia and some Rancilio Silvia machines

$0.00
$29.39

View Product Information

Quantity

Earn 0 reward points

We’re sorry we’re out of stock, but we can let you know as soon as this product becomes available again - this will usually be at the weekend

Enter your details below and we’ll email you once this item is back in stock.

Your NameYour Email Address

This sensor is the same as the one included within the PID mod kits - and is suitable for any PID controller that is capable of taking input from a Pt100 RTD sensor using either two or three wires.

  •  Pt100
  •  Class A
  •  Mounted in an M4 screw thread, ready for simple fitting into the existing thermowell of the Gaggia boiler
  •  Three wire (two red, one white)
  •  750mm lead wires, bare ends
  •  7/0.2mm dia silver plated copper wires
  •  Thin PTFE sheathed in orange
  •  OD : 2.13mm +/- 0.15mm

This kit contains:

  • pt100 sensor with attached wire and m4 mounting screw (as per production description)
  • m4 brass washer
  • installation instructions relevant to a Gaggia Classic with traditional boiler.

NOTE that once you have bought this kit and checked out, the installation notes will be sent to you as a PDF digital download - so you can start reading.

DISCLAIMER:  The installation of any of our parts or kits, and any modification of any espresso machines undertaken by reference to our installation and/or user guides, should only be conducted by persons with proper electrical safety knowledge who are capable and qualified to undertake such work and modifications.  Many of the components within espresso machines operate at high temperature, high pressure and with mains electrical voltages at high current in the presence of water – any of these could cause serious personal injury, shock, burns, fire, explosion, other property damage and possibly death.  We shall hence not be liable for any damage to property, personal injury or other loss caused by the improper or incorrect use of the aforementioned installation and/or user guides or the provided kit(s) or any of those kit’s component or constituent parts.  By commencing installation of our kit(s) you agree to accept all liability associated with the modification of your espresso machine, and agree to hold us in no way responsible or liable for any loss, damage or injury howsoever, wherever or whenever caused.  You further agree to indemnify us and our agents, officers, directors and employees, immediately and on demand, against all claims, liability, damages, costs and expenses, including legal fees, arising out of any installation, use, misuse or failure of any of our kits or component parts thereof.

Be the first to review this product.

Leave a review

No questions yet - Please use "Ask a Question" if you want to know more or contact us on Chat...

Got any questions - Send them to us here...